Douglas Fir Flooring, Paneling & Trim

Clear Vertical Grain Douglas Fir

Clear Vertical Grain (CVG) Douglas Fir is the premium grade — tight, straight grain lines running vertically through the face of each board. CVG is the most dimensionally stable, most wear-resistant, and most visually consistent grade available. It is the gold standard for flooring, paneling, and trim.

Douglas Fir Streamline 3/8" Plank Flooring and Industry Standard Products

Douglas Fir CVG paneling grain — 3/8” × 5-1/4” × 3-12’ $5.55/sf | 3/8” × 3-1/4” × 3-12’ $4.55/sf | 3-20’ $5.55/sf

Single piece 3/8” × 5-1/4” on 24” oc — about 20% flexing. No creaking or cracking. Saves 40% on wood fiber and 40% on freight.

Douglas Fir flooring close-up — 3/8” × 5-1/4” paneling — backside of our flooring-paneling combination. Micro-beveled edge on this sample; nickel gap available.

Paneling side profile — note the scant 3/16” wear layer that will allow for 3–4 sandings and finishes.

Douglas Fir paneling on wall — Mac Lewman 6’1” 225 lbs on 24” oc — virtually no flexing. The custom T&G adds tremendous strength.

Clear vertical grain plank close-up — This product saves 40% of valuable wood fiber and 40% on freight. All 3/8” products are easier to handle and much more forgiving than thicker products.

Tongue and groove flooring planks — Douglas Fir Clear Vertical Grain 23/32″ × 3-1/8″ — 3/4/5’ $3.25/sf | 3-12’ $4.95/sf | 3-20’ $5.95/sf

Wood wall paneling natural finish — Douglas Fir Vertical Grain Rustic Flooring 23/32″ × 3-1/8″ — 3/4/5’ $2.35/sf | 3-12’ or longer $3.35/sf. Subject to availability.

Fir wood grain straight lines — Douglas Fir Vertical Grain Plank 1×6 Flooring, net 23/32″ × 5-1/8″ — 3-12’ or longer $6.55/sf

Douglas Fir CVG Plank Flooring 23/32 x 5-1/8 x 6-12' or longer

Douglas Fir Clear Vertical Grain Trim Stock - all sizes and lengths.

Douglas Fir Beaded Ceiling Paneling CVG and Rustic — Douglas Fir Beaded Ceiling Paneling in CVG and Rustic. This picture shows the smooth back of the Rustic 1x6 Beaded Paneling.

DF VG Rustic Beaded Ceiling 9/16" x 5-1/8" $2.75/sf

Douglas Fir Appearance Grade boards 7/8 x 11-1/4" can run to flooring 11/16" x 10-3/4"

Clear Vertical Grain Hemlock Paneling 11/16" x 5-1/8" with Nickel Gap $9.75/sf

Sanding typically removes 1/32" and is necessary to break the patina and smooth over imperceptible thickness variations between planks. The groove is slightly deeper than the tongue, and the slightly beveled edge paneling back allows for the natural seasonal expansion and contraction of your floor. Contact us for any Douglas Fir, Hemlock or Timbers that you need.

Basic mill unit size: 144" x 44" x 13", 1200sf, 1300 lbs. (366cm x 112cm x 93cm, 112sm, 590kg).

Pricing & Availability

Export Flooring Unit:

Export unit: 144" x 44" x 13", 1,200 sf, 1,300 lbs (366cm x 112cm x 33cm, 112sm, 590kg). Contact us for current pricing and availability.

Affiliate & Trade Inquiries

We welcome inquiries from builders, contractors, architects, interior designers, and flooring distributors. Volume pricing and trade terms available.

Contact Mac for Trade Pricing